What you need to know about installing a large deck
Installing a large deck is a value-added feature of your home. A large, beautiful deck stretches the nerves and expands the view. Making a flat deck accessible means knowing how to choose waterproofing systems, thermal insulation, flooring, electrical connections and lighting systems that are appropriate for the type of deck your home has. Find out in this article how to install a large deck.
What is a large deck for a house?
The level terrace is a pedestrian area larger than a balcony that does not exceed 2 m2. It can be uncovered and belong exclusively to the co-owner of the apartment whose terrace is an extension of the entrance. You can visit the website to learn more about the construction of a large terrace. In fact, it should be remembered that it is precisely for this reason mentioned above that the pedestrian area is considered an asset of the individual condominium, marketed with the apartment itself. A large terrace is lined with parapets, walls that serve to make it passable. A fairly large terrace usually has the function of covering the apartments on the lower floors.
The structure for the installation of a large terrace
The structure of a well-extended terrace is made up of various elements, sometimes even invisible to the eye, and others that make it an aesthetic jewel. Even before the flooring, there are insulators, waterproofing is required, and thermal insulation should be applied only in certain cases. The floor, which can be chosen in different material variants and in many colors. The parapet, which can be a railing or a balustrade. Light and water attacks, which are mandatory when the terrace occupies a large size. Thus, it is necessary to apply thermal insulation when there are inhabited rooms under the terrace to limit the temperature exchange. Thermal insulation should be applied first, under the waterproofing layer, which in turn is under the floor covering. Thermal insulations are rigid high-density polystyrene panels three to four centimeters thick. These are usually applied over a vapour barrier, a 2 mm or 4 mm thick plastic film, placed in contact with the reinforced concrete slab. The specific type of thermal insulation to be used must be chosen according to the thermal performance and the load to be supported.